Electrical components for Hapro home use equipment

For all tanning lamps with 100W

NTC resistor (thermistor) for Philips Suncare / Hapro Mobile Sun / Innergize

Ceramic socket for halogen and HPA lamps with an "R7s" push-in socket. Set of two pieces.

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 140 or 160W. Used in tanning beds from Ergoline and Hapro, among others.

Ignitor for 250-400W HPA lamps as in face tanners from all brands of tanning beds is used. Is also used in Hapro and Philips Innergize.

Electronic ballast ELXD 200UV 255 200W. Suitable for 2x 160W, 2x 180W or 2x 200W fluorescent lamps. Used in various professional tanning beds like Hapro and Ergoline.

Lamp base 20mm with starter holder

This part is used for Hapro models: Lumina C | Lumina E | Lumina<2000

This part is used for Hapro model Innergize HP8565 and for Philips model HB935

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 100 or 120W. Used in tanning beds from Ergoline and Hapro, like nthe Luxura X3 among others.

This part is used for Hapro models: Topaz

This part is used for Hapro models: Jade

This part is used for Hapro models: Model Luxura 630 | Luxura 730 | Luxura 620 | Luxura 720

For all tanning tubes of 80 an 85 Watt

Ceramic socket R7s for Sunvision with face tanning.

Main board for all Luxura V-series sunbeds such as the V5, V6 and V8

This NTC 10 (Thermistor) replaces the smaller NTC 22 at Philips models HB810 to HB823 and the Philips/Hapro HP8540. The NTC 10 is more robust than the NTC 22 and therefore lasts longer.

For all models from HB810 to HB977, the HP8540. Also used for some full-size tanning beds from Philips and Hapro with the following names: Topaz, HB558 through HB568 and the HB585

This part is used for Philips models: HB810 HB811 HB812 HB814 HB821 HB823 Mobile Sun HP 8540

This part is used for Hapro models: Opal