Electrical components for Hapro home use equipment

Main board for all Luxura V-series sunbeds such as the V5, V6 and V8

May & Christe Starter ZG 4,5 D 400W for HPA lamps

This part is used for Hapro models: Topaz | Onyx | Onyx Pro-line | Lumina A | Lumina C | Lumina E | Luxura 530 | Model Luxura 630 | Luxura 730 | Luxura Delta 500 | Lumina<2000 | Luxura 40 | Luxura 520

Electronic ballast ELXD 200UV 255 2x 200W. Suitable for switching two pieces of 200W fluorescent lamps. Used in Hapro professional tanning beds.

For all models from HB810 to HB977, the HP8540. Also used for some full-size tanning beds from Philips and Hapro with the following names: Topaz, HB558 through HB568 and the HB585

For all tanning lamps with 100W

This part is used for Hapro models: Topaz | Onyx | Onyx Pro-line | Lumina A | Lumina C | Lumina E | Lumina V/LuxuraV7<2007 | Luxura 530 | Model Luxura 630 | Luxura 730 | Luxura Delta 600 | Luxura Delt

Ignitor for 250-400W HPA lamps as in face tanners from all brands of tanning beds is used. Is also used in Hapro and Philips Innergize.

Fitting for the HPA lamps of the Hapro Innergize devices in combination with with the supplied bracket only suitable for lamps with a length of 104 to 106 mm

NTC resistor (thermistor) for Philips Suncare / Hapro Mobile Sun / Innergize

This NTC 10 (Thermistor) replaces the smaller NTC 22 at Philips models HB810 to HB823 and the Philips/Hapro HP8540. The NTC 10 is more robust than the NTC 22 and therefore lasts longer.

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 140 or 160W. Used in tanning beds from Ergoline and Hapro, among others.

Lamp base 20mm without starter holder

Fitting for the HPA 400 S lamps of the Hapro Mobile Sun devices. Only suitable for lamps with a length of 118mm

This part is used for Philips /Hapro models: Mobile Sun HP 8540 Type: BHA 500L 322 I

This part is used for Hapro models: Jade | Onyx | Onyx Pro-line

For all tanning tubes of 80 an 85 Watt

This part is used for Hapro model Innergize HP8565 and for Philips model HB935

This part is used for Hapro models: Summer Glow HB 404

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 100 or 120W. Used in tanning beds from Ergoline and Hapro, among others.