Electrical components for Hapro home use equipment

This NTC 10 (Thermistor) replaces the smaller NTC 22 at Philips models HB810 to HB823 and the Philips/Hapro HP8540. The...

This NTC 10 (Thermistor) replaces the smaller NTC 22 at Philips models HB810 to HB823 and the Philips/Hapro HP8540. The NTC 10 is more robust than the NTC 22 and therefore lasts longer.

NTC resistor (thermistor) for Philips Suncare / Hapro Mobile Sun / Innergize

For all tanning lamps with 100W

Ignitor for 250-400W HPA lamps as in face tanners from all brands of tanning beds is used. Is also used in Hapro and Phi...

Ignitor for 250-400W HPA lamps as in face tanners from all brands of tanning beds is used. Is also used in Hapro and Philips Innergize.

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 100 or 120W. Used in tanning ...

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 100 or 120W. Used in tanning beds from Ergoline and Hapro, among others.

This part is used for Hapro models: Summer Glow HB 404 | Mobile Sun HP 8540

For all models from HB810 to HB977, the HP8540. Also used for some full-size tanning beds from Philips and Hapro with th...

For all models from HB810 to HB977, the HP8540. Also used for some full-size tanning beds from Philips and Hapro with the following names: Topaz, HB558 through HB568 and the HB585

This part is used for Hapro model Innergize HP8565 and for Philips model HB935

This part is used for Philips /Hapro models: Mobile Sun HP 8540
Type: BHA 500L 322 I

This part is used for Hapro models: Model Luxura 630 | Luxura 730 | Luxura 620 | Luxura 720

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 140 or 160W. Used in tanning ...

Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 140 or 160W. Used in tanning beds from Ergoline and Hapro, among others.

Electronic ballast ELXD 200UV 255 2x 200W. Suitable for switching two pieces of 200W fluorescent lamps. Used in Hapro pr...

Electronic ballast ELXD 200UV 255 2x 200W. Suitable for switching two pieces of 200W fluorescent lamps. Used in Hapro professional tanning beds.

For all tanning tubes of 80 an 85 Watt

Ceramic socket for halogen and HPA lamps with an "R7s" push-in socket. Set of two pieces.

This part is used for Philips models: HB810 HB811 HB812 HB814 HB821 HB823
Mobile Sun HP 8540

Fitting for the HPA 400 S lamps of the Hapro Mobile Sun devices.
Only suitable for lamps with a length of 118mm

Lamp base 20mm with starter holder

This part is used for Hapro models: Summer Glow HB 404

This part is used for Hapro models: Mobile Sun HP 8540