Hapro

This part is used for Hapro models: Innergize HP 8550 | Innergize HP 8565 | Innergize HP 8580

SunHorse electronic ballast for two 100W lamps. This part is used for Hapro models: Luxura X3 II | Pro-line V | Seecret ...

SunHorse electronic ballast for two 100W lamps. This part is used for Hapro models: Luxura X3 II | Pro-line V | Seecret 300

This part is used for Hapro models: Luxura X5 | Luxura X7 | Luxura X10 | Sunpoint Medium X2 | Sunpoint Medium SLX

This part is used for Hapro models: Lumina C | Lumina E | Lumina<2000

This gas spring is used for Hapro models: Lumina C | Lumina <2000. Among others for the Hapro Lumina 3803, Lumina 2211 a...

This gas spring is used for Hapro models: Lumina C | Lumina <2000. Among others for the Hapro Lumina 3803, Lumina 2211 and Lumina 3621

This part is used for Hapro models: Lumina V/LuxuraV7<2007

For the Opal 12V with slanted leg from before 2000 Thickness cylinder: 28mm Thickness piston rod: 14mm Length excluding ...

For the Opal 12V with slanted leg from before 2000 Thickness cylinder: 28mm Thickness piston rod: 14mm Length excluding mounting eyes; 74cm Model Hapro Opal 12V for the year 2000

Replacement gas spring for the discontinued original version of Stabilus with Stabilus number 7749MV

Hapro Diamond Whitefilter 240 x 240 mm for Hapro Ruby | Sapphire | Synergy | Lumina A | Lumina C | Luxura X3

Rubber fan cover for fan 12x12cm Topaz

Operating foil for the first (I) Hapro X-series Sli.
Used with the Luxura X5 I, the Luxura X7 I and the Luxura GT

This gas spring is equal to the original one. But only suitable when the Opal is fitted with the original 90W lamps! If...

This gas spring is equal to the original one. But only suitable when the Opal is fitted with the original 90W lamps! If there are already heavier 100W lamps fitted in your Opal, this gas spring is not suitable. Then replace with our 170N version.

This gas spring is more powerful than the original. Specially produced for Opal canopy's with 100W lamps. These lamps we...

This gas spring is more powerful than the original. Specially produced for Opal canopy's with 100W lamps. These lamps weigh more than the original thin Philips Cleo Effect 90W lamps.

Covers the lamp-ends of the the vertical Hapro Pro-Line V

This part is used for Hapro models: Emerald <2000
For replacement of gas springs having a number which ends with . .57

This part is used for Hapro models: Topaz