4,9
Sunbeds
Solarium Spare parts
Infrared cabin parts
Tanning lamps
Replacement Patio Heater Lamps
Used eg in the Philips / Hapro HB404 Summerglow. Can also be used for the Alisun 1200H, 1200B, 1000H, 1000B, 900S. Other brands have used this double pole timer.
The latest improved Hapro Innergize HP8580. With new design control unit for simple operation and ease of use.
This part is used for Hapro Model: Topaz And for Philips Models: HB555, HB556, HB557, HB558, HB566, HB567, HB568 en HB585 Measurements: 1808 x 638,5 x 2mm
HP8540, with three FlexPower lamps. Most powerful mobile tanner available. 1500W of tanning power. Easy to fold. Guaranteed lowest price.
For all models from HB810 to HB977, the HP8540. Also used for some full-size tanning beds from Philips and Hapro with the following names: Topaz, HB558 through HB568 and the HB585
MPN: HX6854A . This timer is used for Hapro model Jade
1100W For all models Innergize. Length 254mm. Original Hapro/Philips. Philips number: 422206296300.
Facial tanner with powerful 400 Watt HPA lamp. Has a large tanning surface of 40 x 60 cm.
This part is used for Hapro models: Topaz And for Philips Models: HB557, HB558, HB566, HB567, HB568 en HB585 Measurements: 1808 x 638 x 3mm
This part is used for Hapro models: Pearl | Opal | Ruby
Fluorescent light starter suitable fluorescent lamps with the highest powers. Used by Hapro for 160W, 180W and 200W lamps.
This part is used for Hapro models: Onyx | Onyx Pro-line
This part is used for Hapro models: Summer Glow HB 175. Also fits all other sunbed and sunbed timers.
Original overrule timer for Hapro and Philips HP8540 models. Maximum time: 45min. Suitable for circuits with an overrule print (watchdog). Replaces ok the 60min. switching timer from other Philips 3-lamp models
Display sticker for Hapro Lumina models SPR, C en E
Parallel capacitor for the compensation of the reactive current that you have with inductive tanning beds. Capacity: 45 MF (45 µF)
NTC resistor (thermistor) for Philips Suncare / Hapro Mobile Sun / Innergize
This part is used for Hapro models: Sapphire | Jade | Onyx | Synergy and a lot of older types with 850N. Stabilus Lift-o-mat / hydrolift 1394ML
Main circuit board for Hapro Lumina type C and E. Also used in the first generation Luxura X5 and X7
