4,9
Solarium Spare parts
Infrared cabin parts
Tanning lamps
Replacement Patio Heater Lamps
Electronic ballast from manufacturer Vossloh-Schwabe for fluorescent lamps with a power of 140 or 160W. Used in tanning beds from Ergoline and Hapro, among others.
Facial tanner with powerful 400 Watt HPA lamp. Has a large tanning surface of 40 x 60 cm.
MPN: HX6854A . This timer is used for Hapro model Jade
Lamp used in parasols and sun shades equipped with patio heating. Also available in a shorter 1500W version.
Replacement lamp 2000 Watt for Term2000 IP65 and IP67 patio heaters.
Electronic ballast ELXD 200UV 255 200W. Suitable for 2x 160W, 2x 180W or 2x 200W fluorescent lamps. Used in various professional tanning beds like Hapro and Ergoline.
Replacement Palm Beach gas spring 4300 and 4500 series Comes with new ball heads and nuts Total extended length: about 26cm Color: Galvanized Comes as 780N, the 750N version is no longer available.
This part is used for Philips and Hapro models: Innergize HP 8550
HPA 400W lamp with R7s fitting and a length of 104mm
Ceramic IR tube element with a length including collars of 810mm. Specially for infrared cabins with the European voltage of 230V (220V - 240V).
For all Innergixze models with InfraTan Like for example Philips (Hapro) HB935, HB937, HB947 HP8550, HP8560, HP8565 and HP8580. We also have the corresponding infrared lamp on our website
Ignitor for 250-400W HPA lamps as in face tanners from all brands of tanning beds is used. Is also used in Hapro and Philips Innergize.
The Maxlight HP 400-600 flexpower 118mm is the factory HPA fit for Hapro HP 8540 Mobile Suns. This lamp is also suited for all Philips Home Solarium lamps.
Philips S12 starter for electromagnetic ballasts. Was often used for tanning beds with fluorescent lamps from 80 to 160W. Other variants are currently available for lamps below 115W and above 140W.
Replacement gas spring for the commonly used Alpha Sun 0330N gas spring from Stabilus. Both for the versions mounted on a sunbed and the version of the sunsky on a stand. The original Stabilus article was: 716448 or 9543HP
Genuine 2mm thick acrylic-sheet for Alpha Industries sunbeds. Used in several models such as the Alphasun Sunny, Alphasun Color, Blue Line, Rising Sun, LaserSun and others
Original Palm Beach gas spring. Delivered including ball heads and nuts. Total extended length: approximately 27 cm.
